Télécharger Imprimer la page

MS 1011 Mode D'emploi page 13

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 28
INTRODUCTION:
The Baby monitor has been designed to help you look after your baby and is
not Intended as a tool for substituting the adults' supervision & care in any cir-
cumstances.
The Baby Monitor is a portable monitoring system with the following features:
* 2.4GHz Digital wireless transmission.
* High sensitivity.
* Voice activation function so as to save power.
* Battery power with AAA size1.5 V alkaline for each unit ( 6 pieces are requi-
red, but batteries are not included)
* Electric power with power adaptors ( 2 pieces supplied both with the transmit-
ter and the receiver )
* Transmitting range up to 300 meters in open field.
* Position the transmitter at a distance of about 1.5-2.0 meters from the baby.
* A clip on the rear of the receiver unit plus battery operation increases porta-
bility.
* There are 36 channels to avoid interference (FHSS). so crystal clear sound is
possible.
* 2 way communication
SAFETY:
For your safety, please use the provided power adaptors. (The manufacturer
will not be responsible to any loss incurred by not using the manufacturer's pro-
vided power adaptors).
To reduce the risk of fire or electric shock, do not expose this baby monitor to
rain or moisture.
Connect the baby monitor to an easily accessible AC outlet. Should you notice
an abnormality in the device, disconnect the main plug from the AC outlet imme-
diately.
DON'T disassemble the casing in order to avoid the risk of the electric shock.
Refer servicing to qualified personnel only.
DON'T use the damaged power adaptors.
DON'T interfere the plug of power adaptors with conductors, e.g. with rings.
Warning:
Battery may explode if mistreated.
Do not recharge, disassemble or dispose of in fire.
All manuals and user guides at all-guides.com
13

Publicité

loading

Produits Connexes pour MS 1011