DeWalt D27105 Manuel D'instructions page 45

• Lift the machine by the legs.
When carrying the machine, always seek assistance.
The machine is too heavy for one person to handle.
Maintenance
Your D WALT power tool has been designed to operate over a long
E
period of time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
Lubrication
The bearings of the motor are pre-lubricated and watertight.
• Slightly oil the rotating table bearing surface where it slides on the lip of
the fixed table at regular intervals.
• Periodically lubricate the depth of cut screwthread.
• Clean the parts subject to accumulation of sawdust and chips
periodically with a dry brush.
Cam adjustment (fig Z1 - Z3)
To take out the clearance between the two tables, proceed as follows:
• Rotate the machine into saw bench mode.
• Remove the screws (138) and the retainer plate (139).
• Loosen the screw (140) of the adjustment cam (141).
• Rotate the adjustment cam using a pair of needle nose pliers.
• Hold the adjustment cam with the pliers and tighten the screw.
• Replace the retainer plate and tighten the screws.
• Rotate the machine into mitre saw mode. Check the force that is
needed to mitre the saw. Repeat the above steps if the force needed is
too high.
Unwanted tools and the environment
Take your tool to an authorized D
disposed of in an environmentally safe way.
All manuals and user guides at all-guides.com
WALT repair agent where it will be
E
GUARANTEE
• 30 DAY NO RISK SATISFACTION GUARANTEE •
If you are not completely satisfied with the performance of your
D WALT machine, simply return it within 30 days, complete as
E
purchased, to the point of purchase, for a full refund or exchange.
Proof of purchase must be produced.
• ONE YEAR FREE SERVICE CONTRACT •
If you need maintenance or service for your D
12 months following purchase, it will be undertaken free of charge at
an authorized D WALT repair agent. Proof of purchase must be
E
produced. Includes labour and spare parts for Power Tools.
Excludes accessories.
• ONE YEAR WARRANTY •
If your D WALT product becomes defective due to faulty materials or
E
workmanship within 12 months from the date of purchase, we
guarantee to replace all defective parts free of charge or, at our
discretion,
replace the unit free of charge provided that:
• The product has not been misused.
• Repairs have not been attempted by unauthorized persons.
• Proof of purchase date is produced.
This guarantee is offered as an extra benefit and is additional to
consumers statutory rights.
For the location of your nearest authorized D
please use the appropriate telephone number on the back of this
manual. Alternatively, a list of authorized D
details on our after-sales service are available on the Internet at
www.2helpU.com
E N G L I S H
WALT machine, in the
E
WALT repair agent,
E
WALT repair agents and full
E
45