Herzberg HG-5200 Manuel D'instructions page 8

3. Always be sure to turn off the engine before performing any maintenance or checking procedures.
4. When sharpening removing or reattaching the blade proper tools and equipment to prevent injury.
5. When replacing blade or any other parts or when replacing the oil or any lubricants always be sure to use
only products or products which have been certified by for use with the brush cutter.
5. SET UP
All manuals and user guides at all-guides.com
ENGINE AND MAIN PIPE
Align the hanger and the fuel tank using attached 4 socket screws
secure the connection firmly with equal force.(F1)
(1) Fuel tank
(2) Molt
(3) Main pipe
HANDLE
1.Loosen the 4 bolts on the handle bracket.(F2)
2.Insert the right handle (throttle lever is attached) and the left
handle assembly into the bracket and retighten the bolts
securely.(F2)
(1) Handle bracket
(2) Right handle
(3) Bole
(4) Left handle
(5) Engine side
SAFETY GUARD
Attach the safety guard to the gear case and fix it with the clump
and 2 bolts (M5*25) securely.(F3)
(1) Bolt
(2) Clamp
(3) Main pipe
(4) Safety guard
THROTTLE WIRE
WARINNG
After fitting up the wire make sure that the throttle cable is
put in the throttle lever. If not it is very dangerous because
the engines rotate after releasing the throttle.
1. Hook the cable end into the hole of the throttle lever. And set
the cable in the lever as shown in the picture.(F4)
2. Wrap the band so as the throttle wire is fixed with the handle.