Publicité
Les langues disponibles
Les langues disponibles
One hard disk drive LED is red
The hard disk drive is faulty and must be replaced.
The drives are in caddies, allowing you to replace a faulty drive while the
appliance is operational. The replacement drive is imaged automatically from
the existing drive.
To replace a faulty drive:
1. Push the faulty drive's release button, then pull its handle down
Installation Guide
All manuals and user guides at all-guides.com
WARNING: When replacing the hard disk drives, ensure that you
follow this information:
• Do not remove both drives from the appliance at any time. At least
one drive must remain within the appliance at all times.
• Do not allow the appliance to be operational for more than a few
minutes with one of the drives missing, because this disturbs the
airflow and can result in the appliance overheating. Insert the
replacement drive immediately.
• Only use drives that have exactly the same specification as the
existing drives.
• When handling the drives, take care not to touch any static-sensitive
components. Observe reasonable anti-static precautions, and do not
insert your hand or any other object into the appliance's empty
drive area.
1-5). Pull the drive out of the drive area.
Figure 1-5. Removing the drive
Installation Guide — English
(Figure
ENG - 61
Publicité
