Publicité
Les langues disponibles
Les langues disponibles
E. Connecting the Receiver
How To Receive Wireless Audio/Video on Your TV
There are two ways to receiver wireless audio/video signals on your remote TV (TV in another
location such as in bedroom, kitchen)
• Connect the receiver directly to the remote TV
• Connect the receiver to a VCR, which is then connected to the TV.
Note : If your TV has picture-in-picture capabilities, you can view any image transmitted by sys-
tem, such as your sleeping baby, in a small inset picture while enjoying other programming on the
rest of the screen. Consult the owner's manual of your TV for instructions on using these capabili-
ties.
Connecting Receiver Directly to Remote TV
1. If your TV has A/V jacks, connect one set of A/V cables (or SCART cable labeled «RECEIVER»)
to the TV's A/V jacks and to the A/V output jacks on the receiver (X300A or X301A). Be sure the
yellow, red and white plugs match the yellow, red and white jacks on both the TV and the receiver.
If the TV has only a single jack for audio input, connect the white plug to that jack.
Notice d'utilisation du transmetteur Audio/Vidéo 2,4GHz
All manuals and user guides at all-guides.com
Receiver
TV
To power outlet
Page 19
Publicité
