Stainless Steel Maintenance - Astralpool NF P90-306 Manuel D'installation Et De L'utilisateur

TOP MODEL SAFETY FENCE

3 STAINLESS STEEL MAINTENANCE

CONDITIONS FOR THE MAINTENANCE OF STAINLESS
STEEL WHEN IT'S USED:
1. It is important to wash regularly the
stainless steel components with fresh
water.
2. The pool water should be maintained at
an adequate filtration cycle and opti-
mum cleanliness in strict accordance
with the manufacturers instructions
regarding chemical dosage (pH, chlori-
ne concentration, salts, etc)
3. Chemical products should always be
added to the pool keeping well away
from any stainless steel elements so as
to avoid high concentrations and stains
produced by splashes.
4. Avoid deposits of dust, salt, concrete
and dirt as well as contact with other
metals (especially iron) as these factors
will increase the risk of corrosion.
5. During the initial cleaning of the pool
shell (before filling) and for subsequent
cleans, remove all stainless steel ele-
STORAGE:
1. Stainless steel elements that are not in
use should be removed, washed with
fresh water, dried and stored away from
chemical products and dosing appara-
tus.
MEDIUM MODEL SAFETY FENCE
ments to avoid contact with cleaning
products. Any stainless steel part that
cannot be removed should be washed
thoroughly with plenty of water.
6. Covered pools produce a higher con-
centration of corrosive vapours from
the chemical products in use and will
therefore require cleaning more fre-
quently.
7. Where possible, all stainless steel ele-
ments within the pool parameters
should be banded.
8. It is essential to choose the correct
grade of stainless steel (AISI-304 or
AISI-316) in pool installations that are
typically affected by severe ambient or
water conditions.
2. Where staining or calcium deposits
occur, clean with ASTRALPOOL stain-
less steel cleaner and enhancer without
scouring with abrasive materials. Wash
afterwards with plenty of fresh water
and dry well.
ENGLISH
USER
MANUAL
8