Krüger & Matz KM0255UHD Mode D'emploi page 32

Base stand assembly instruction
When you install the base, the need to face down flat on the TV platform. Before installing
(or removing) the stand, unplug the AC power cord from the AC outlet before performing
the operation, laying cushion in place the TV will be placed to prevent damage to the TV.
Warning:
Be sure to follow the instructions for installation, if the base is not installed correctly, it
may result in the TV falling over. To remove the stand, perform the steps in reverse order,
the base can not adjust the angle. During the installation process, being careful to avoid
damage to the TV and your hand caught and ground to the bottom of the TV.
32
All manuals and user guides at all-guides.com
Owner's manual
Step 1
Locate the 2 pcs of bottom
bracket into the gap in the
bottom of the TV, and check that
it is securely held in place as in
illustration a) below.
Step 2
Lock the 2 pcs screws in the
designated location
illustration b) below. Check each
screw is firmly tightened.
as in