Caution:
To avoid injury
and irreparable
damage, always
remain seated
when using
massager. Never
stand on the unit.
Fig. 1
Fig. 2
All manuals and user guides at all-guides.com
Instructions for Use
To reduce the risk of electric shock, this appliance is equipped with
a polarized plug (one blade wider than the other). This plug will fit
in a polarized outlet only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician to install the proper outlet. Do not change the plug in
any way.
1. P lug into a 120-volt outlet.
2. It is highly recommended that the foot massager be used with
socked feet. Do not use the unit with shoes.
3. Place massager on the floor in front of your chair or seat.
4. T o activate massage action, press Power button once. The LED
illuminator will glow blue (Fig. 1).
Tip: By changing the pressure of your feet on the massager,
it will change the feel of the massage. If the unit tickles you,
then you may need to apply more pressure or you may need
to become accustomed to the sensation. If the massage feels
too strong, you may need to lighten the pressure of your feet
on the unit.
5. To activate soothing heat with the massage, press the
Power button a second time. The LED illuminator will glow red
(Fig 2). Allow a few moments for the heating action to warm up.
6. W hen finished, turn the unit "OFF" and unplug. "OFF" is reached
by pressing the Power button until the unit turns off. (The first
press of the power button turns on the massage function; the
second press turns on the soothing heat function, and the third
press turns the unit off.)
NOTE: As a safety feature, the soothing Heat function cannot be
used alone.
5