Publicité
Les langues disponibles
Les langues disponibles
Positioning Laser Lines
The adaptable metal base allows precise positioning of the laser
lines.
D
！
Note:
To secure the laser unit correctly, the fixing screw(D) must be
snapped into the groove in the laser unit.
1.
Alignment with motion base
Turn ON/OFF the Laser Tool
• Short press
The power indicator LED (17) will light up in red.
• Horizontal line and self-leveling mode turned on in default after
power on.
5
11
3.
2.
to turn ON/OFF the laser unit.
A. Undo threaded adapter lock screw (11).
B. Remove 5/8" threaded adapter(5) and
screw it into the 5/8" tripod thread(4) of the
laser unit.
C. Place the laser unit with 5/8" threaded
adapter(5) on the metal base and tighten
the lock screw (11).
Alignment with vernier adjustment
-8-
Publicité
