Publicité
Les langues disponibles
Les langues disponibles
Tilt Function
• Press and hold the button
LED（18） flashes rapidly.
• Position the laser unit at various angles.
• Press and hold the button
LED (18) lights off, or short press
power ON again. It will return to the self-leveling mode.
Note:
• To restore horizontal or vertical leveling, deactivate the tilt
function.
！
• The automatic sensor is deactivated under tilt function.
• Under tilt function, the laser beam(s) will blink about every
3-5 seconds to notify the user it is not self-leveling now.
• For the tilt function, laser lines are no longer aligned to the
horizontal or vertical plane. This is a specific feature of adjusted
laser lines.
Pulse Mode
Under pulse mode, the laser unit can work with Huepar Laser
Receiver (optional) to carry out leveling at great distances or when
the laser lines are no longer visible.
A. Pulse mode under Self-leveling mode:
• Turn on the laser unit, short press
on.
3 sec.
for ≥3 seconds until the tilt function
for ≥3 second until the tilt function
to turn OFF the laser unit and
Place the laser unit for use
to turn the Pulse Mode
-13-
at any angle.
Publicité
