Zehnder AA 05 Mode D'emploi page 11

Wall mounting installation (see sketch)
1. After you found the best location to place the antenna at the wall, mark with
a pencil the 2 positions for the wholes to fix the standing unit.
2. Drill with a 5,8mm-drill the two wholes into the depth of about 35mm. (If you
install to a wooden wall you do not need to drill and use the plastic poles)
3. Hammer the two plastic poles with a hammer into the wholes.
4. Screw the screws with a screwdriver into the plastic pole as far as you still
easily can hook the standing unit of the antenna. Leave the screws about
10mm out of the wall.
5. Connect all cables and hook the antenna onto the screws.
All manuals and user guides at all-guides.com
11