Publicité
Les langues disponibles
Les langues disponibles
4
model no. 009-0223-2 | contact us 1-888-670-6682
9
2
No.
Description
1
M14 X 65 mm bolt
2
M14 washer
3
M14 lock washer
4
M14 nut
5
L pin
6
M10 nut
7
M10 lock washer
8
M10 washer
9
M10 x 75 mm bolt
10
M12 x40 mm bolt
11
Cotter pin
12
Rear castors
SPECIFICATIONS
Capacity
All manuals and user guides at all-guides.com
20
5
19
4
18
17
3
9
2
1
2
8
11
7
6
12
16
15
6
7
8
10
6
7
6
8
7
14
8
21
9
24
13
24
23
23
22
22
Qty.
No.
Description
4
13
Front castor
6
14
Front frame
4
15
Centre frame
4
16
Rear frame
1
17
Main post
4
18
Mounting plate
4
19
Mounting arms
4
20
Handle
4
21
M8 x 16 mm bolt
1
22
M8 nut
2
23
M8 lock washer
2
24
M8 washer
1000 lb (454 kg)
ASSEMBLY INSTRUCTIONS
•
Attach front castors (13) to the front frame using the bolts (21), nuts (22) and
washers (23, 24).
•
Attach rear castors (12) to rear frame using washers (2) and cotter pins (11).
•
Attach centre frame to the front frame using bolts (9), washers (7,8) and nuts (6).
•
Install main post onto the rear frame using bolts (9), washers (7,8) and nuts (6).
•
Insert centre frame into main post. Align the holes of the centre frame and main
post, and thread into bolt (10).
•
Install mounting plate into the collar on top of the main post and secure with the L
pin (5).
•
Attach four mounting arms to the mounting plate using bolts (1), washers (2,3),
and nuts (4). Note that 2 washers are used for each bolt.
•
Slide the handle through the hole at the rear of the mounting plate.
Qty.
OPERATING INSTRUCTIONS
2
•
BEFORE APPLYING THE LOAD TO THE STAND, lock the mounting plate of the
1
head assembly to the stand's main post using the pin.
1
•
Align tubes on mounting arms with appropriate holes in rear of engine block. Insert
1
bolts through arm/tube assembly and secure to engine block. (End users must use
1
the appropriate bolts to secure the engine to the mounting arms. These bolts are
1
not included with the stand.)
4
•
Centre the load and tighten bolts securing engine to mounting arms. Tighten bolts
1
securing mounting arms to mounting plate. Carefully remove lifting device.
8
8
8
8
5
Publicité
