Publicité
Les langues disponibles
Les langues disponibles
Starting the Engine
Make sure that all appliances are disconnected from the AC Receptacle.
1.
Electric start（only for electric start models）
1. Open gasoline switch and air inflow knob.
st
2..
When 1
starting the unit or after the unit has been allowed to run out of fuel or stored for an extended period of
time it will be necessary to prime the fuel system by depressing the "Primer Bulb" multiple times to ensure the fuel
system is filled and there is no air in this system.
until it becomes hard to press before attempting to start. It is also sometimes necessary to depress the primer bulb
prior to each start and which is normal. To start a cold engine, move the choke lever to the start position. To restart a
warm engine set the choke lever halfway between the start and run positions. To restart a hot engine place the choke
in the run position.
NOTE: Some models may be equipped with a knob style push/pull choke. On these units pull the choke knob for the
starting position and push the knob in for the running position.
All manuals and user guides at all-guides.com
You may have to depress the primer bulb from 20 to 50 times or
Choke Lever Indicator
11
Publicité
