Publicité
Les langues disponibles
Les langues disponibles
5.4 Programming timer (alternative to 5.3)
5.4.1 Adjusting the control mode
If you want to program the timer control, press
flashing.
If you want to operate slot 2 (
Continue making your settings with item 5.4.2 of these instructions.
) is to be operated via interval control, use the ▲ button to select "Int" (Interval) and confirm by pres-
If slot 2 (
sing the
button. Continue making your settings with item 5.4.3 of these instructions.
) is to remain permanently activated, use the ▲ to select "ON" and confirm by pressing the
If slot 2 (
If you want to finish programming, press and hold
12
All manuals and user guides at all-guides.com
while "TIME" is flashing, then "
) with programmed turn-on and turn-off times, press
for 3 seconds until the display returns to operating mode.
" (automatic) starts
when "
" flashes.
button.
Publicité
