Tanita PD-640 Mode D'emploi page 6

EN
Usage 3. Changing setting content
Press the [ ] Set button for one second or more.
Usage 4. Switching the display
The display mode changes every time the
Mode button is pressed.
Usage 5. Clearing the display
The number of steps and the distance can be set to zero
by pressing the Clear button.
Steps and distance are reset to zero when the [
is pressed.
* Clock display does not change.
Notice
• Once the values for steps and distance have been cleared, they
cannot be restored.
Usage 6. Clearing the system
Clear the system when you want to erase all set data, or when the display
becomes irregular or the buttons do not function.
1. Open the front and back cases.
* The battery cover cannot be removed while they are closed.
2. Remove the battery cover.
3. Press the Clear button.
* Use a rigid stick with a slim tip to press the button.
4. Fit the battery cover.
Notice
• After a system clearance, all values (Time, Stride Length, Steps, Distance) are zeroed and cannot
be restored.
6
Display
[ ]
] Clear button