Publicité
Les langues disponibles
Les langues disponibles
Power ON/OFF
1.
The GPS Computer automatically turns on when a battery is inserted
or connected via USB.
The GPS Computer will start logging once powered on.
2.
The GPS Computer automatically re-starts logging (counter/pedometer/
GPS data resets, etc.) at 00:00:00 everyday.
Hardware Reset
•
Pressing down both the Up and Power/Menu buttons simultaneously for
5 seconds resets the hardware settings.
Getting Started with GPS Computer
To get started with the GPS Computer, please follow the steps described below:
1.
Install @trip PC and Sports Analyzer software from the CD.
2.
Connect the GPS Computer to your PC using the USB cable.
3.
Keep the GPS Computer connected to PC and charge for at least 4
hours prior to first use.
4.
Unplug the GPS Computer from PC once fully charged, and press the
Power/Menu button for 2 seconds to power on.
5.
On the GPS Computer, select a display language, set the time, and
select a measurement unit standard.
Note: Before setting time, please go outdoors to obtain a GPS fix first.
28
All manuals and user guides at all-guides.com
Publicité
