Publicité
Les langues disponibles
Les langues disponibles
7.2 Error indications
Display
Meaning
Quick flashing
No connection to
in yellow
network or router
Continuous
No Internet con-
lighting in
nection
yellow
Quick flashing
Update error
in red
Quick flashing
Preliminary step
in orange
for restoring the
factory settings
Long lighting
Reset failed
in red
All manuals and user guides at all-guides.com
Solution
Connect the Access
Point to the router.
Check the Internet
connection and the
firewall settings.
Check the server and
Internet connection.
Restart the Access
Point by shortly dis-
connecting it from the
power supply.
Press the System key
again for 4 seconds
until the LED lights up
in green.
Repeat the process.
8 Cleaning
Clean the device with a soft, clean, dry, and lint-free cloth. The
cloth may be moistened with lukewarm water for the removal
of heavier contamination. Use a solvent-free cleaning agent for
cleaning.
9 Resetting factory settings
All settings will be lost when the factory settings are restored.
The factory setting of the individual Alpha IP components must
also be restored.
1. Disconnect the Access Point from the power supply. Pull the
mains plug for this.
2. Connect the base station again to the power supply and press
the System key simultaneously for 4 seconds until the LED
flashes rapidly in orange.
3. Release the System key.
4. Press the System key again for 4 seconds until the LED lights
up in green.
5. Release the System key again.
9 The device restarts.
The factory settings are reset.
Displays/Cleaning/Factory settings
21
Publicité
