PURE AIR 3 PRO + Manuel D'utilisation page 15

2.7.3 Speed
The current speed is shown by the large digits in the centre of the display.
The throttle will not engage at speeds below 3km/h. If less than 3km/h shows on
the display, push off the ground until 3km/h, after which the throttle will engage
with a thumb press.
2.7.4 Units
By default, the e-scooter will display metric units (km/h). To switch to imperial
units (mph), go to 'settings' in the mobile app (see 2.5) when connected
via Bluetooth.
14
Rider pushes off to
get up to 3km/h
Stop
mph setting
via App
km/h setting
via App
Throttle
applied
Throttle
released
Pure Air
3