Overheat protection
A thermal cut-out automatically switches
the appliance off if it is overheating.
If the appliance is turned off due to
overheating, follow the instructions below:
•
Switch off the appliance (unplug it).
•
Remove the cause of the overheating
(e.g. materials covering the air intake
or preventing free air circulation, dust,
lint, etc.).
•
Allow the appliance to cool for a few
minutes.
•
Then turn the appliance back on.
CLEANING
When cleaning the appliance, you should
pay attention to the following:
•
Turn off the appliance and unplug it
before cleaning.
•
Do not submerge the appliance in
water, and do not let water enter the
appliance.
•
Vacuum the grilles to remove any
dust or lint.
•
Clean the appliance by wiping it with
a damp cloth. Do not use detergents
of any kind.
UK
INFORMATION ON
DISPOSAL AND
RECYCLING OF THIS
PRODUCT
Please note that this Adexi product is
marked with this symbol:
This means that this product must not be
disposed of along with ordinary household
waste, as electrical and electronic waste
must be disposed of separately.
In accordance with the WEEE directive,
every member state must ensure
correct collection, recovery, handling
and recycling of electrical and electronic
waste. Private households in the EU can
take used equipment to special recycling
stations free of charge.
In some member states you can in
certain cases return used equipment to
the retailer from whom you purchased
it, if you are purchasing new equipment.
Contact your retailer, distributor or
the municipal authorities for further
information on what to do with electrical
and electronic waste.
30