Pret a Pousser Nano Garden Mode D'emploi page 10

english
SETTING UP NANO GARDEN IN 5 MINUTES
1
2
3
10
Assemble the two pieces of
the rod by screwing them
Put the clips around the
cable and the rod.
Place the lamp on the
metal rod, 5cm above
the pot.
Once plugged in, your lamp will
light up and is automatically set
to a 'summer' light intensity and
a 16h cycle. To modify these
settings, pair your smartphone to
your lamp (see next page).
Put the floater in the
pot.
The top side is the mounting
end and the bottom side is the
flat base. Fill in with water until
the top side is slightly above
the pot's rim.
4
Put the nutrient bag
in the water.
No need to open it, just put it
in the water directly.
5
Insert the pod into the
floater.
6
Sow the seeds.
Open the seedbag and put the
seeds in the pod.