Télécharger Imprimer la page

Oregon Scientific AuraBreeze WA638 Mode D'emploi page 6

Diffuseur d'arôme

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14
LCD DISPLAY SCREEN
1
2
5
6
1.
the unit is in volume setting mode
2.
the soothing sound is on / the unit is in soothing
sound setting mode
3.
Mood light is on / the unit is in mood-light setting mode
4.
Diffuser is on / the unit is in diffuser setting mode
5.
Alarm is set to on / the unit is in alarm setting mode
6.
Sleep timer is on / the unit is in sleep timer setting mode
7. Time display
8.
Diffuser low battery display (CR2032)
GETTING STARTED
INSERT CR2032 BATTERY
This unit is equipped with a CR2032 battery as a backup
power source.
1. Open the battery compartment cover by turning it in
anticlockwise using a coin.
2. Insert a CR2032 battery into the compartment,
matching the polarity.
3. Close the battery compartment cover by turning it in
clockwise using a coin.
ADD WATER
NOTE Do not plug the unit to the power outlet before
adding water.
1. Remove the water tank cover, pour tap water in room
temperature into the water tank. Do not exceed the MAX
mark.
All manuals and user guides at all-guides.com
3
4
7
8
3
2. Add few drops of essential oils into the water.
3. Place the cover back in place.
4. Plug the power adapter to the power outlet. Make sure
the adaptor is not obstructed and is easily accessible
to the unit.
5. Press
to turn the unit on.
When the water almost runs out (around 50ml remains in
the unit), the diffusing function will stop automatically and
will keep blinking until the unit is turned off.
NOTE
Do not use distilled water with this product.
Temperature of water should be around 15 – 40 °C.
100% nature essential oil should be used.
Switch off the unit and unplug from the mains before
moving or cleaning the unit.
When the water fills up to the MAX marking, the unit
diffuses mist up to 8 hours approximately if the sleep
timer is set to OFF.
CLOCK
SET THE CLOCK
Set the clock when the unit is turned on for the first time.
1. Press
to set the 12/24-hour format, hour or minute.
Press and hold
to speed up the selection.
2. Press
to confirm.
DIFFUSER
SET THE DIFFUSER
1. Press
once to display the current setting. The screen
displays
.
NOTE The screen returns to idle if no keys are pressed
after 2 seconds.
2. Press
again to toggle different diffusing modes
1 (Low), 2 (High) or OFF.
MOOD LIGHT
SET MOOD LIGHT
1. Press
once to display the current setting. The screen
displays
.
2. Press
again to toggle different mood light setting
(1/2/3/4/5/6/LOOP/OFF).
SOOTHING SOUND
SET SOUND
1. Press
once to display the current setting. The screen
displays
.
NOTE The screen returns to idle if no keys are pressed
after 2 seconds.
2. Press
again to toggle different sound (1/2/3/4/5/6/OFF).

Publicité

loading