VISIOMED bewell connect MyCompanion Mode D'emploi page 21

2-3. INSTALLING THE SIM CARD
• If the product is delivered without operator SIM :
You have obtained a second SIM card from your operator, or a twin card on your usual subscrip-
tion OR you have acquired a classic internet/sms/voice type subscription.
Regardless of the chosen operator, check that the subscription includes a sufficient number of
sms and data volume suited for its use (refer to your operator's instructions).
Important : In both cases, check that the SIM card PIN code is set to 0000 or deactivated. The
phone's APN settings should be configured according to the mobile operator. To find out how
to do this, go to:
www.bewell-connect.com/support
• If the product is delivered with a SIM card :
The SIM card is pre-activated, it suffices to insert it into the product.
This procedure is likely to change depending on the operator. Please consult the internet site to
take advantage of the latest updates :
www.bewell-connect.com/support
Important : the tracker should be switched off when the SIM is inserted. Open the trap and
insert the SIM (see diagram below).
2-4. SWITCHING ON
To turn on the device, press and hold the button for about 3 seconds, until the LED shifts to red.
32 BewellConnect - BW-PX10 - 062015
All manuals and user guides at all-guides.com
SIM
2-5. ATTACHING THE TRACKER TO THE ANIMAL'S COLLAR
A. Attach the tracker directly on the collar
B. For big collars, use the collar adapter
BewellConnect - BW-PX10 - 062015 33