Starway Daytona Manuel De L'utilisateur page 64

030 - 039 Idle
040 - 145 Chase Forward (From Fast to Slow)
Pattern
17
Step
146 - 149 Stop
150 - 255 Chase Backward (From Slow to Fast)
Fade 000
18
between
001 - 255 Fade from fast
steps
19
Zoom 000 - 255 Zoom
000 - 020 Default unit setting
021 - 040 Standard
041 - 060 Stage
20 Dim Modes
061 - 080 TV
081 - 100 Architectural
101 - 255 Theatre
000 - 004 Idle
005 - 009 Invert Pan on (Hold 3s)
010 - 014 Invert Pan off (Hold 3s)
015 - 019 Invert Tilt on (Hold 3s)
020 - 024 Invert Tilt off (Hold 3s)
025 - 029 Fan Silent (Hold 3s)
030 - 034 Fan Auto (Hold 3s)
035 - 039 Fan High (Hold 3s)
040 - 089 Idle
090 - 101 Linear Dimmer Curve (hold 3s)
102 - 113 Square Dimmer Curve (hold 3s)
114 - 125 Inv - Square Dimmer Curve (hold 3s)
126 - 131 S - Dimmer Curve (hold 3s)
132 - 137 Led Freq. 900 Hz (hold 3s)
138 - 143 Led Freq. 1000 Hz (hold 3s)
144 - 149 Led Freq. 1100 Hz (hold 3s)
150 - 155 Led Freq. 1200 Hz (hold 3s)
156 - 161 Led Freq. 1300 Hz (hold 3s)
162 - 167 Led Freq. 1400 Hz (hold 3s)
168 - 173 Led Freq. 1500 Hz (hold 3s)
174 - 179 Led Freq. 2500 Hz (hold 3s)
180 - 185 Led Freq. 4000 Hz (hold 3s)
186 - 191 Led Freq. 5000 Hz (hold 3s)
21 Control
192 - 197 Led Freq. 10000 Hz (hold 3s)
198 - 203 Led Freq. 15000 Hz (hold 3s)
204 - 209 Led Freq. 20000 Hz (hold 3s)
210 - 215 Led Freq. 25000 Hz (hold 3s)
216 - 218 Reset Pan/Tilt (Hold 3s)
219 - 221 Reset only Head (Hold 3s)
222 - 224 Reset All Functions (Hold 3s)
225 - 234 Idle
235 - 237 Klingnet Disable
238 - 240 Leds controled Klingnet only
241 - 243 Leds controled Klingnet + Dmx
244 - 246 Klingnet Calibration OFF
247 - 249 Klingnet Calibration ON
250 - 255 Idle
Page 64
no fade
Narrow to Wide
The fan turn always at same low speed
The fan speed increase with temp
The fan turn always at same high speed
The leds are controlled only by the dmx or
Artnet
The leds are controlled only by the Klingnet
The leds are controlled by the Klingnet but
the dmx has priority over RGBW
So that the Klingnet white is matched with
for example an Led screen, it is possible to
calibrate it in the Modena calibration menu.
This calibration can be activated or not from
the console.
So that the Klingnet white is matched with
for example an Led screen, it is possible to
calibrate it in the Modena calibration menu.
This calibration can be activated or not from
the console