Power Fist 8328270 Instructions D'assemblage page 3

V 1.0
ASSembLy InStructIonS
steP 1 : attach casters
Use M8 bolts (16, 19, 20,21) install casters (18,22) on the frame.
Note the 2 casters with brakes (18) are at the front end.
steP 2 : assemble lIftInG beam
anD suPPOrtInG tube
Connect lifting beam and supporting tube with nut, washer and bolt (1,2,6).
Repeat this process 3 times (Fig.2).
steP 3 : attach screw JacK
Use M10 x 90 mm bolts (9,10,13) to install screw jack (23) to the frame (12).
Use m10 x 100 mm bolts (9,10,11) to attach screw jack to supporting
tube assembly (8).
All manuals and user guides at all-guides.com
IMPORTANT! Ensure screw jack
mounting bracket (23A) faces up (Fig. 4).
Fig.4
for any technical questions, please call 1-800-665-8685
3
8328270
Fig.1
Fig.2
Fig.3