The Travel Buggy CITY LITE Mode D'emploi page 16

To transport your CITY LITE, it is advised that you fold it up following the procedures below.
NOTE: Never transport the CITY LITE in a tie down system, as the CITY LITE is not compatible with
them. Never sit in the CITY LITE and be transported in a moving vehicle. Do not place the folded CITY
LITE in the front seat with the driver where it could move or slide.
1. Turn off the controller and unplug the wire harness. Remove the controller by loosening the
knob and sliding it out of the chair.
2. Rotate both armrests up and toward the back of the chair.
3. Store the cushion underneath the chair.
4. Squeeze both levers to fold the back rest down.
5. Pull the cable located under the seat to release the locking mechanism.
6. Push the back rest toward the seat and fold up the foot rest.
1. Unplug and remove
5. Pull cable
For instructions on how to unfold the CITY LITE, see the Setup portion of this manual.
The Travel Buggy
1.888.56.BUGGY
Transporting Your City Lite
2. Rotate arm rests
6. Fold up
16
3. Store cushion 4. Squeeze levers and
fold back rest down
CITY LITE Model V1