Berner Thermo Control III Manuel D'utilisation page 25

Display
Scan
Min/Max
function
Maintenance and cleaning
To prevent electric shocks, do not allow moisture to ingress the
housing.
Use a dry cloth, without cleaning agent, to clean the housing at regular
|
intervals. Do not use any abrasive or scouring agents, or solvents.
Blast loose particles of contamination from the IR lens. Use a fine lens
|
brush to remove remaining contamination.
Safety
When opening the instrument, remember that some internal
condensers retain voltage potential that is dangerous to life after
being switched off.
If faults or unusual events occur, decommission the instrument
and make sure that it can no longer be used until after it has been
checked.
All manuals and user guides at all-guides.com
Laser switched on
Background lighting switched on
Measuring active
Temperature retention phase
active (Hold function)
Battery symbol
Temperature value measured
Temperature unit
Measurement functions
24