Berner Thermo Control III Manuel D'utilisation page 20

General safety notes
All manuals and user guides at all-guides.com
WARNING
Unauthorised modification and/or changes to the instrument
are not permitted, for reasons of safety and approval (CE).
In order to ensure safe and reliable operation using the
instrument, you must always observe the safety instructions,
warnings and the information contained in the section
"Intended use".
WARNING
Please observe the following information before using the
instrument:
Do not operate the instrument anywhere near electrical
|
welders, induction heaters or other electromagnetic fields.
Further to abrupt temperature fluctuation, the instrument
|
must be allowed to adjust to the new ambient
temperature for approx. 30 minutes before using it, in
order to stabilise the IR sensor.
Do not expose the instrument to high temperatures for
|
a long period of time.
Avoid dusty and humid environments.
|
Measuring instruments and their accessories are not toys,
|
and must be kept out of the reach of children!
In industrial facilities, the accident prevention regulations
|
for electrical systems and equipment, established by the
employer's liability insurance association, must be
observed.
19