Philips POCKET MEMO ACC8120 Mode D'emploi page 5

3 Get started
Caution
• Ensure you have read the safety instructions before you con-
nect and install your recorder.  Safety instructions, p. 3.
Connect the docking station
1
Plug the USB cable supplied with the docking station into
the power adapter and connect it to the main power
supply.
2
Insert the micro USB plug into the power adapter port
( ) on the rear side of the docking station.
3
Plug the USB cable supplied with the recorder into a USB
port on your computer.
4
Insert the micro USB plug into the USB port (
rear side of the docking station.
All manuals and user guides at all-guides.com
Charge the battery
1
2
) on the
Place the recorder in the docking station.
X The recorder starts charging.
X The charge indicator light flashes green while the
battery is being charged.
X The charge indicator light changes to solid green when
the battery is fully charged.
Notes
• Charge the battery for 3 hours before first use.
• The recorder may become warm when the battery is being
charged.
• The maximum battery capacity will only be reached after
several charging/discharging cycles.
Your recorder is now ready to use.
EN 5