Enabled Devices (Multi-Point) - Clarity SEMPRE mini Guide De L'utilisateur

Pairing SempreMini with two Bluetooth
SempreMini supports a multi-point function to allow simultaneous pairing with two devices.
1. Pair SempreMini with the first device (follow the steps in "Pairing Your SepreMini with a
Bluetooth-enabled device").
2. Turn off SempreMini and the Bluetooth® function of the first paired device.
3. Pair SempreMini with the second device (follow the steps in "Pairing Your SempreMini with
a Bluetooth-enabled device").
4. Activate the Bluetooth connection between SempreMini and the first paired device on that
device's menu. Alternately, turn SempreMini off and then back on - it will connect to the
two devices automatically.
• For some devices, you may need to manually select "connect" to connect SempreMini.
• If the pairing cannot be completed within two minutes, SempreMini will auto-matically go
to standby mode and then turn off after five minutes. Repeat steps to pair both devices
again.
Reconnecting Your SempreMini
1. If SempreMini has been turned off, it will reconnect to the phone automatically after
turning it on; if not, press reconnect on the phone.
2. If the phone has been powered off and SempreMini is then disconnected, reconnect it via
the phone's menu when the phone is on again. Or, turn SempreMini off and then back on.

-enabled devices (Multi-point)

®
E
N
G
L
I
S
H
5