Télécharger Imprimer la page

HoMedics mybaby soundspa on-the-go Manuel D'instructions page 3

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 4
All manuals and user guides at all-guides.com
CREATE THE PERFECT ENVIRONMENT FOR YOUR BABY
Thank you for purchasing the MyBaby by HoMedics SoundSpa On-The-Go. The SoundSpa On-The-Go will
help your baby wind down and relax.
Fig.1
VOLUME UP
WHITE NOISE
HEARTBEAT
POWER
PRODUCT FEATURES:
• Soothing Sounds: White Noise, Ocean, Heartbeat, and
Lullaby.
• Auto-Timer lets you choose how long you listen – 15, 30,
45 minutes or continuously
• Digital volume control allows you to adjust the volume of
the sounds
• Compact and lightweight for travel.
• Uses 3 AAA batteries (included).
INSTRUCTIONS FOR USE:
How To Install Batteries:
1. Make sure the unit is turned OFF.
2. Locate the battery cover. Use a coin to loosen the screw.
3. Remove the battery compartment door and the
exhausted batteries (if applicable).
4. Install 3 new "AAA" batteries following the diagram
inside the battery compartment.
Note: We recommend using alkaline batteries for longer
battery life.
5. Replace the battery compartment door and tighten the
screw to secure.
Note: When sounds become faint or stop, it is time for an
adult to change the batteries.
Listening to the Sounds:
1. Press and hold the POWER button for 2 seconds to turn
ON. The red LED power indicator will illuminate.
VOLUME DOWN
OCEAN
LULLABY
TIMER
GB
2
I
2. Select the sound you wish to listen to and press the
corresponding button. (See Fig.1)
Note: When the unit is turned on, it will always default
to the last sound used.
3. To adjust the volume, press the r button or s
button to your desired level. (See Fig.1)
4. Press and hold the POWER button for 2 seconds to
turn OFF.
Using the Auto-Timer:
When the power is on and you are listening to a sound,
you may set a timer so the unit will automatically turn off
after 15, 30, or 45 minutes.
1. Press timer button . The green LED timer indicator
under the specified timer setting will illuminate.
(See Fig.1)
2. Keep Pressing the timer button  to move through
different timer options. The timer feature has been
turned off when green LEDs are off.
MAINTENANCE:
To Store
You may leave the unit on display, or you can store it in
its box or a cool, dry place. Batteries should be removed
prior to storage.
To Clean
Wipe off dust with a damp cloth. NEVER use liquids or
abrasive cleaner to clean. Do not immerse in water.

Publicité

loading