MSI Z590-S01 Manuel D'instructions page 8

Rear I/O Panel
DisplayPort
LAN Port LED Status Table
Link/ Activity LED
Status Description
Off No link
Yellow Linked
Blinking Data activity
Audio 7.1-channel Configuration
To configure 7.1-channel audio, you have to connect front audio I/O module to JAUD1
connector and follow the below steps.
1. Click on the Realtek HD Audio Manager > Advanced Settings to open the dialog
below.
Select Mute the rear output device, when a front headphone plugged in.
2.
3. Plug your speakers to audio jacks on rear and front I/O panel. When you plug into
a device at an audio jack, a dialogue window will pop up asking you which device
is current connected.
8
Rear I/O Panel
All manuals and user guides at all-guidesbox.com
USB 2.0 Type-A
USB 3.2 Gen
USB 3.2 Gen
1 (5Gbps)
Type-A
USB 3.2 Gen
2x2 (20Gbps)
2.5Gbps
LAN
1 (5Gbps)
Type-A
USB 3.2 Gen
1 (5Gbps)
Type-A
Type-C
Speed LED
Status
Off
Green
Orange
Audio Ports
Optical
S/PDIF-Out
Description
10 Mbps connection
100/1000 Mbps connection
2.5 Gbps connection