Oregon Scientific GP108 Manuel De L'utilisateur page 4

NOTE When the device is left idle for 30 seconds during
set up, it will automatically exit the setting mode and display
the time.
NAVIGATING THROUGH THE OPTIONS
KEY PRESS PROMPTS
The device has been designed with prompts to guide you
through the settings and displays.
MODES
There are 3 modes. Press MODE/- to toggle through the
different modes.
MODE/-
MODE/-
All manuals and user guides at all-guides.com
MODE/-
4
SETTING MODE
When prompted to set device after starting it for the first
time, the screen below will be shown. Go directly to step 2.
For normal setting procedure:
1. Press MODE/- repeatedly to select SET UP. 'SET EX'
will be displayed shortly after.
2. Press to enter exercise settings.
3. Set the speed zone (On/Off; speed zone lower and
upper limits) by pressing the following buttons:
• MODE/- to decrease values or toggle options; return
to previous display
• LAP/+ to increase values or toggle options
• to confirm
4. Press MODE/- to return to previous display, "SET EX"
screen will appear.
To continue setting other profiles:
1. Press LAP/+ to toggle to another profile setting.
LAP/+
2. Then press to enter.
3. Press LAP/+ to select from these sub-settings: TIME /
UNIT / BEEP / TOGG (see below table), then
enter.
to