MPMan PDV 2000 Mode D'emploi page 28

• Ensure that the TV and amplifier have been turned on and properly set up.
• Ensure that the TV and amplifier connections are secure and correct.
• Try a different Audio track of the DVD by pressing AUDIO.
• Ensure that the MUTE function of the TV, Amplifier, or Player is not engaged.
The remote control doesn't work.
• Ensure that the Power Switch has been physically set to the ON position.
• Ensure that there are no obstacles between the remote and the player.
• Point the remote at the remote sensor on the main unit.
• Ensure that the batteries in the remote retain a charge and have been installed correctly.
• Try replacing the remote's batteries.
The player has malfunctioned.
• Unplug the player. After 30 minutes, plug in and power on the player -- the restore function should reset
the player.
Monitor troubleshooting
There is no power to the device.
• Ensure that the Power Switch on the monitor is physically set to the ON position.
• Ensure that the AC adaptor cord is securely connected to the player and the proper wall outlet.
There is no sound or distorted sound.
• Ensure that the AV cable connections are secure and correct.
• Ensure that the MUTE function of the monitor is not engaged.
The picture is noisy or distorted.
• Reset the monitor's color system.
• Ensure that the AV cable connections are secure and correct.
This is to certify that the portable DVD palyer is conformity with
council directive 2004 / 108 / EC(EMC Directive)
Applicable standards
EN55013:2001+A1+A2
EN61000-3-2:2006
EN61000-3-2:2008
EN55020:2007
For more information please visit our website
www.mpmaneurope.com
All manuals and user guides at all-guides.com
TROUBLESHOOTING