Publicité
Les langues disponibles
Les langues disponibles
PUT THE MACHINE
Please follow the following steps in order to store your device after each use and at the end of the season:
•
Clean the machine as described in the previous section.
•
Inspect the blades and leave them, if necessary.
•
Grease and lubricate the different moving parts. You can apply a layer of oil with a brush on the metal
parts and blades to protect them from corrosion.
•
Store the electrical tool in the shelter, in a cool and dry place, out of reach of children. Avoid storing it
near corrosive substances, such as fertilizers, diluers or fuels.
•
Do not cover your machine with a waterproof tarpaulin; By condensation, the humidity retained may
damage the metallic and electronic components of your machine.
•
At the end of the season in addition to previous instructions, you must protect your machine from frost
and humidity.
•
Store the logging in a place inaccessible to children.
•
Make sure there is no oil leak before storage.
RECYCLE AN ELECTRICAL DEVICE
The components of your electric machine can contain dangerous elements for the environment and should
not be thrown into the wild or with your household waste. In order to avoid any risk for the planet, here is
the procedure to throw your tool:
•
Cover the terminals of the socket with adhesive tape.
•
Do not try to dismantle or access the components of the device.
•
Do not incinerate the machine.
21/11/2022
EN
23
Publicité
