TMI VK61 Fonctionnement

[ VK61 ]
*1 : Hour hand
*2 : Minute hand
*3 : Center 1/5 chronograph second hand
*4 : Small second hand
*5 : Chronograph minute hand (60 minute)
*6 : 24 hour hand
*7 : Button A (START/ STOP)
*8 : Button B (RESET)
*9 : Crown at normal position
*10 : Crown at first position (Date setting)
*11 : Crown at second position (Time setting)
Set the time
1) Pull out the crown to the second click position.
2) Turn the crown to set hour and minute hand (Check that AM / PM is set correctly)
3) Push the crown back into the normal position.
* If the crown is pulled to the second position while the chronograph is started, the chronograph hands will
continue to move. This is not malfunction.
Set the date
1) Pull out the crown to the first click position.
2) Turn the crown clockwise for date setting
* Do not set the date between 9:00PM and 3:00AM, otherwise the day may not change properly. If it is
necessary to set the date during that time period, first change the time to any time outside it, set the date
and then reset the correct time.
3) Push the crown back into the normal position.
All manuals and user guides at all-guides.com
Operation Manual
VK61 / VK64
DISPLAY AND CROWN/ BUTTON OPERATION
TIME SETTING
[ VK64 ]
VK61 VK64
O O
O O
O O
O (6H) X
O (12H) O (9H)
X O (3H)
O O
O O
O O
O O
O O
English