Publicité
Les langues disponibles
Les langues disponibles
English
Labels
1
VELOCITY
Self-Retracting Lifeline
ANSI Z359.14-2021
Not suitable for leading edge use
Nunca deben usarse en aplicaciones
2
Part #
Date of Manufacture
MM
Read supplied instructions before using. Failure to follow instructions
may result in serious injury or death. Never modify product. This product is not repairable.
USE This device is only for use by one person as
a fall arrester. Only make connections directly to
attachment point on safety harness. Guard against
swing-fall by keeping lifeline vertically overhead.
Ensure that connection to anchorage is secured
properly before use. Avoid lifeline contact with
sharp or abrasive edges and surfaces. May be used
as a component of a PFAS in HLL applications.
Design, installation, and utilization of HLLs must
be supervised by a Qualified Person. Not suitable
for horizontal use. Competent Person must
calculate fall clearance prior to use; fall clearance
calculations must include considerations for swing
fall. Clearance numbers specified based on lifeline
installed vertically overhead and in-line with worker.
Date of First Use
Date
Type: SRL
DO NOT REMOVE
LABELS
Class
1
Anchor at or
above dorsal
D-ring
|
OSHA 1926.502 & 1910.140
WARNING
de borde expuesto
Lot #
Serial #
|
YY
INSPECTION Prior to each use, check locking (pull sharply to
test) and retraction function. Inspect for signs of deployment,
defects or damage to housing, lifeline (inspect full length),
connectors, or missing parts. Refer to instruction manual for
checking snap hook deployment. Ensure presence and legibility
of all labels. Inspection by Competent Person required at least
every 12 months. Immediately remove from service in event of
failed inspection, or if unit is subjected to a fall.
Lifeline Material: Steel Cable
|
Length: 50'
User Weight Range (including tools and equipment):
ANSI: 130-310 lb
|
OSHA: 100-420 lb
Average Arresting Force: 1,350 lb
Maximum Arresting Force: 1,800 lb
Maximum Arresting Distance: 3' 6"
Free Fall: Not permitted
Minimum Required Fall Clearance: 7'
Permitted Service Temperature: -40° to 130° F
Tested in USA.
Made in
Taiwan.
guardianfall.com
1
Class 1
Anchor at or above dorsal D-ring
WARNING
Not suitable for leading edge use
VELOCITY
Self-Retracting Lifeline
2
Part #
Serial #
Date of Manufacture:
Lot #
WARNING Read supplied instructions before using.
Failure to follow instructions may result in serious injury
or death. Never modify product. This product is not
repairable.
USE Free fall is not permitted. SRL must always be
positioned at or above harness dorsal D-ring. Avoid
lifeline contact with sharp or abrasive edges both
during work and in event of a fall. Ensure connection to
anchorage is secured properly before use. May be used
as a component of a PFAS in HLL applications. For use
by trained users only. Maximum one user.
Lifeline Material: Steel Cable | Length: 50' (15,4 m)
User Weight Range (including tools and equipment)
and Maximum Arresting Distance:
ANSI: 130-310 lb - 3' 6" (59 - 140 kg - 1,07 m)
OSHA: 100-420 lb - 3' 6" (45 - 190 kg - 1,07 m)
Average Arresting Force: 1,350 lb (6 kN)
Maximum Arresting Force: 1,800 lb (8 kN)
Maximum Free Fall: Not Permitted
Minimum Required Fall Clearance:
100-420 lb - 7' (45 - 190 kg - 2,13 m)
Permitted Service Temperature Range:
-40 °F to 130 °F (-40 °C to 54 °C)
Type: SRL
INSPECTION Prior to each use, check locking (pull
sharply to test) and retraction function. Inspect for signs
of deployment, defects or damage to housing, lifeline
(inspect full length), connectors, or missing parts.
Ensure presence and legibility of all labels. Inspection
by Competent Person required at least every 12 months.
Immediately remove from service in event of failed
inspection, or if unit is subjected to a fall.
Designed and Tested in USA.
Made in Taiwan.
6
Publicité
