Klauke Ultra ESG50-L Mode D'emploi page 9

Instruction Manual Cutting Tool
ESG 50-L
Index
1. Introduction
2. Warranty
3. Description of the electric-hydraulic tool
3.1 Description of the components
3.2 Brief description of the important features
of the tool
3.3 Description of the tool indication
4. Remarks in respect of the determined use
4.1 Operation of the tool
4.2 Explanation of the application range
4.3 Mounting instructions
4.4 Service and Maintenance instructions
5. Troubleshooting
6. Technical data
7. Putting out of operation/waste disposal
Symbols
Safety warnings
Please do not disregard these instructions in or-
der to avoid human injuries and environmental
damages.
Operational warnings
Please do not disregard them to avoid dama-
ging the tool.
1. Introduction
Before starting to use the tool please read
the instruction manual carefully.
Use this tool exclusively for its determined use.
Cutting conductors/cables with the help of this tool must
only be performed by specially trained personnel. The mi-
nimum age is 16 years.
This instruction manual has to be carried along during the
entire life span of that tool.
The operator has
• to guarantee the availability of the instruction manual
for the user and
• to make sure, that the user has read and understood
the instruction manual.
2. Warranty
If the tool is operated according to its intended
use and the regular maintenance services are
observed our warranty is 24 months from the
time of delivery. Worn-out parts resulting from
its intended use are excluded. We reserve the
right to rework the tool in case of a justifi ed war-
ranty claim.
HE.13457_B © 09/2010
All manuals and user guides at all-guides.com
3. Description of the electric-hydrau-
lic tool
3.1 Description of the components
The electric-hydraulic tool is a hand guided tool and con-
sists of the following components:
Table 3 (see Picture 1)
Pos. Description Function
1 LED (red) Indicator for battery charge con-
trol, tool functions and faults
2 Battery Rechargeable 3Ah Li-Ion
cartridge battery (RAL2/BL1830)
Optional:
mains adapter NG2230
3 Trigger Switch to start ccutting
procedure
4 Retract button Button to open the blades
in case of emergency
5 LED (white) to illuminate the working area
6 Blades cutting blades for light armoured
copper and aluminium connec-
tors and cables
7 Latch device to open the cutting head
8 Cutting head Solid 350° smoothly rotary hinged
cutting head for the reception of
the blades
9 Ring device to secure the cutting tool
10 Housing ergonomically formed plastic
housing in a 2-Component de-
sign for perfect handling
1
GB