All manuals and user guides at all-guides.com
MANUAL
This product has been designed to operate safely and reliable for several years. However because of its electronic
nature manuals and technical information supplied along with the hand dryer must be carefully read. Please keep
this manual and the rest of information for future consults. If you transfer the unit to a third party please include
manuals and unit technical information.
WARNING: ELECTRICAL CIRCUIT:
This unit must be powered by a dedicated circuit branch protected by a circuit breaker with the appropriate rating:
Model 240V:
Circuit Breaker: 16A
Circuit cable must fit current consumption for your product as stated in this manual.
SAFETY A+ND USE
This unit has been designed for indoor use only, covered from water sun and extreme temperatures do not use it
outdoors or close to moisture and heat generators. Minimal distance to water source must be at least 16 inches
(40cm). Must be installed following the instructions of this manual. Manufacturer is not responsible for damages
caused by misuses or defective installations. This hand dryer can only be revised maintained and repaired by trained
and authorized personnel. Always use original pieces and spare parts. Power the hand dryer from appropriate power
source according to the acquired equipment. The unit electrical specifications plate shows the power rating.
Children must be supervised by an adult while using this product. This product is designed for an efficient and quick
hand drying. Never try to dry any other part of the body. Foreign objects must not be put neither in nor over the
hand dryer. Heavy objects must not be put over the hand dryer If this unit fails it must be taken out of order and
technical service (or distributor) must be called for a product check. Inner space of this product is protected and
locked by screws so only trained and authorized personnel should revise this unit. There are neither serviceable nor
replaceable parts inside the unit. Packaging protects the unit in warehouse and transportation. It is made of
recyclable materials. When packaging is no longer needed, dispose it appropriately according to recycling normative.
When replacing a product:
This unit has been marked with European WEEE symbol. Obsolete or inoperative units must be disposed according
to electric and electronic waste management normative in your country. This unit must be disposed in an
appropriate manner to avoid potential environmental damages or just for re-cycling some of their materials. In
Europe you must dispose this unit in a recycling center in your area or contacting your dealer or local government.
MAINTENANCE
External: This unit must be cleaned once per day using a soft cloth with water for removing dust and water over
external case. Do not use scouring agents or all-purpose cleaners. Never immerse unit in water.
Water Tank: Water from drying process is recollected in a tank located in bottom part of the unit. Water tank must
be emptied at least once per week. This unit generates a visual and audible alarm when tank is near high level. If
tank is not emptied water will overflow dropping to the floor. This unit works properly even when high level alarm is
in ON status.
Dust Filters: This unit has 2 dust filters (one per motor) located in water tank. This filters need to be revised and
cleaned at least once per week. Please consult maintenance section of this manual before performing any
maintenance operation.
INSTALLATION AND OPERATION
Revise related sections of this manual
4