Goodwe SECU-A Serie Guide Rapide page 4

EN
Emergency Measures
Battery Electrolyte Leakage
If the battery module leaks electrolyte, avoid contact with the leaking liquid or gas. The
electrolyte is corrosive. It will cause skin irritation or chemical burn to the operator. Anyone
contacts the leaked substance accidentally has to do as following:
• Breath in the leaked substance: Evacuate from the polluted area, and seek immediate
medical assistance.
• Eye contact: Rinse your eyes for at least 15 minutes with clean water and seek immediate
medical assistance.
• Skin contact: Thoroughly wash the touch area with soap and clean water, and seek
immediate medical assistance.
• Ingestion: Induce vomiting, and seek immediate medical assistance.
Fire
• The battery may explode when the ambient temperature exceeds 150 °C. Poisonous and
hazardous gas may be released if the battery is on fire.
• In the event of a fire, please make sure that the carbon dioxide extinguisher or Novac1230 or
FM-200 is nearby.
• The fire cannot be put out by water or ABC dry powder extinguisher. Firefighters are required
to wear full protective clothing and self-contained breathing apparatus.
Label Description
Potential risks exist. Wear proper
PPE before any operations.
HIGH VOLTAGE HAZARD High
voltage exists during the
equipment's running.
Ensure the equipment is power off
before any operations.
Operate the equipment properly to
avoid explosion.
The equipment
electrolytes. In case of a leak in the
equipment, avoid contact the leaked
liquid or gas.
Batteries contain flammable
materials. Beware of fire.
Read through the user manual
before any operations.
Pay attention to wearing PPE during
installation, operation and maintaining
of the product.
contains corrosive
02
Keep the equipment away from open
flame or ignition source.
Keep the equipment
children.
No extinguishing with water.
Do not dispose of the equipment
with household garbage at its end
of life.Dispose it according to local
laws and regulations or send it to the
manufacturer.
Recycle regeneration mark
CE Marking.
Grounding. To indicate PE cable
connection position.
away from