Goodwe SECU-A Serie Guide Rapide page 3

01 Safety Precaution
General Disclaimer
• The information in this user manual is subject to change due to product updates or other
reasons. This guide cannot replace the product labels or the safety precautions in the user
manual unless otherwise specified. All descriptions in the manual are for guidance only.
• Before installations, read through the quick installation guide. For additional information,
please see the user manual.
• All operations should be performed by trained and knowledgeable technicians who are
familiar with local standards and safety regulations.
• Check the deliverables for correct model, complete contents, and intact appearance. Contact
after sales service if any damage is found or any component is missing.
• Use insulating tools and wear personal protective equipment (PPE) when operating the
equipment to ensure personal safety. Wear anti-static gloves, cloths, and wrist strips when
touching electron devices to protect the equipment from damage.The manufacturer shall not
be liable for any damage caused by static electricity.
• Strictly follow the installation, operation, and configuration instructions in this guide and
relative user manual. The manufacturer shall not be liable for equipment damage or personal
injury if you do not follow the instructions. For more warranty details, please visit:
en.goodwe.com/warranty.
Safety Disclaimer
Instructions during Installation
• The battery system is a low voltage system. Please keep Power Off before any operations to
avoid danger. Strictly follow all safety precautions outlined in this manual and safety labels on
the equipment during the operation.
• The inverter used with the battery shall be approved by the battery manufacturer. The
approved list of batteries and the matched inverter can be obtained through the official
website.
• Do not disassemble, modify, or replace any part of the battery or the power control unit
without official authorization from the manufacturer. Otherwise, it will cause electrical shock
or damages to the equipment, which shall not be borne by the manufacturer.
• Do not hit, pull, drag, squeeze or step on the equipment or put the battery into fire.
Otherwise, the battery will be exploded.
• Do not place the battery in a high temperature environment. Make sure that there is no heat
source near the battery and no direct sunlight. When the ambient temperature exceeds
60 °C, it will cause a fire.
• Do not use the battery if it is defective, broken, or damaged. The damaged battery may leak
electrolyte.
• To protect the battery pack and its components from damage during transportation, please
ensure that the transportation personnel are professionally trained. All operations during the
transportation have to be recorded. The equipment shall be kept in balance, thus avoiding
falling down.
• The battery equipment is heavy. Please equip the corresponding personnel according to its
weight, so that the equipment does not exceed the weight range of the human body can
carry, and smash the personnel.
• Contact after-sale service immediately if the battery is not able to be started. Otherwise, the
battery might be damaged permanently.
• Do not move the battery system if it is connected with external battery modules. Contact
after-sale service if the battery shall be replaced or added.
01
EN
EN
https://