Publicité
Les langues disponibles
Les langues disponibles
Turn ON the laser tool:
●
Short press Power Button to turn laser tool ON
Turn OFF the laser tool:
●
Step 1, Slide the pendulum/transit switch to the Locked Position.
●
Step 2, Press the power button and hold for 2 seconds to turn the laser tool OFF.
Note: The laser level can only be turned off when the pendulum/transit in its Locked Position.
Lines switching:
●
Short press the power button repeatedly to switch the composition of different laser lines.
Switch to Pulse Mode:
●
Press the pulse button "P" to turn the Pulse Mode on
Note: Laser level can work with Laser Receiver under pulse mode.
LED Power Indications:
LED
Self-leveling Mode
●
is enabled when the pendulum/transit is switched to the unlocked position.
●
The laser beam(s) blink fast when tool is out of self-leveling range(4°±1°).
Manual Mode
●
is enabled when the pendulum/transit is switched to the locked position.
●
is enabled to position the laser tool at various angles to project non-level straight lines or points.
●
The laser beam(s) will blink about every 3-5 seconds to notify the user. Notice: The laser beam(s)
projected in manual mode cannot be used as a horizontal or vertical reference in nature
Pulse Mode
●
Under pulse mode, Laser tool can work with a laser detector for working in a brighter environment
or a larger working distance
●
Press the pulse button "P" to turn on the Pulse Mode.
●
Press the pulse button "P" again to return back Normal Mode. Notice: The laser beam is dimmer in
pulse mode.
Note:
Due to product improvement，appearance and specifications may differ Working distance varies
depending on the operating environment.
Charging
The machine is equipped with 3.7V lithium battery, which is a removable one. if battery is low
or no power after starting up.you can charge machine directly or take out the battery to charge.
Please use the adapter with DC 5V and 1A/2A to charge it, the charging port is the Type C port.
The battery icon
Operation Modes
Capacity
75%-100%
50%-75%
25%-50%
0%-25%
will be displayed in scrollable way during charging process.
- 04 -
Publicité
