dosatron SD25AL5 Manuel D'utilisation page 62

ALARMS
ACTIVE IN REC RECORDING MODE ONLY
The red LED will be activated for as long as the alarms are active. All the alarm screens
become priority and thus temporarily mask the screen currently being used. Press on one
of the three browsing keys to reactivate the use screen.
Empty tank alarm
Low Level Alarm
LOW LEVEL
Recirculation alarm
Excessive flow alarm
Motor Stop Alarm
The system indicates the end of the tank. This
alarm ends the recording automatically. The
date and time of the activation of the alarm are
displayed
Configurable alarm (in cm) with the aim of
warning the user of the imminent end of the
processing tank. Do not stop the ongoing
recording
Indicates an abnormal increase in the level of
the processing tank (e.g. suction valve leak on
the pump recirculating water in the tank or if
the operator refills the tank during recording)
The doser has exceeded the maximum
admissible flowrate at a given time. Do not
stop the ongoing recording. If this frequently
occurs the use of a higher flowrate doser is
recommended
The water circulates, the water meter detects
the flowrate but the Dosatron pump motor is
shut down (no signal detected by the flexible
blade switch sensor located on the doser lid).
© ©
DOSATRON INTERNATIONAL S.A.S. / 62 DOSATRON INTERNATIONAL S.A.S. / 26