MSI H61M-P32/W8 Serie Mode D'emploi page 24

JBAt: Clear CMoS Jumper
there is CMoS rAM onboard that is external powered from a battery located on
the mainboard to save system configuration data. With the CMoS rAM, the sys-
tem can automatically boot into the operating system (oS) every time it is turned
on. if you want to clear the system configuration, set the jumper to clear the CMoS
rAM.
iMPortANt
you can clear the CMoS rAM by shorting this jumper while the system is off.
Afterwards, open the jumper . do not clear the CMoS rAM while the system is on
because it will damage the mainboard.
JuSB_PW/ JuSB_PW2: uSB power Jumpers
these jumpers allow you to enable/ disable the "Wakeup from S3/S4/S5 by uSB
and PS/2 device" function.
JuSB_PW
JuSB_PW2
iMPortANt
if you set the jumper to enabled, the power supply must be able to provide at
least 2A currents.
24
All manuals and user guides at all-guides.com
1
keep data

1

1
Clear data

1

disabled


enabled