Publicité
Les langues disponibles
Les langues disponibles
EN
Maintain tools with care. Keep tools sharp and clean for better and safer
performance.
Follow instructions for lubricating and changing accessories. The
handles must be kept clean, dry, and free from oil and grease at all times.
Remove adjusting keys and wrenches. Check that keys and adjusting
wrenches are removed from the tool or machine work surface before starting
work.
Stay alert. Watch what you are doing, use common sense. Do not operate
any tool when you are tired.
Check for damaged parts. Before using any tool, any part that appears
damaged should be carefully checked to determine that it will operate
properly and perform its intended function. Any part that is damaged should
be replaced.
Replacement parts and accessories. When servicing, use only identical
replacement parts. Use of any other parts will be prohibited. Only use
accessories intended for use with this tool.
Do not operate tools if under the influence of alcohol or drugs. Read
warning labels on prescription to determine if your judgment or reflexes are
impaired while taking drugs. If there is any doubt, do not operate the tool.
WARNING: The warnings, cautions, and instructions discussed in this
instruction manual cannot cover all possible conditions and situations that
may occur.
ASSEMBLY INSTRUCTION
Unpacking
●When unpacking, check to make sure all parts listed are included.
Assembly
●All parts listed and numbered refer to those in the Parts List.
●Step 1 Connect the two Support Frames (2) to the Tray (6) and Base Frame
(7) using four Bolts (9), Washers and Nuts as shown.
●Step 2 Attach the Seat Cushion (1) to the Support Frames (2) and secure it
using four Screws (3) provided.
●Step 3 Tighten all hardware before using your Rolling Creeper Garage Seat.
03
Publicité
