Mio Pacer PC+ Mode D'emploi page 9

D. SETTING THE ALARM
1. Press the MODE button until you reach the alarm screen.
2. Press and hold the Set button until the hour begins to flash. Use the + or – to
increase or decrease the hour. Press SET to confirm and repeat for minutes.
3. To activate the alarm press the – sub menu button, you will see a "√" or an "X"
indicating the alarm is on or off.
4. When the alarm is sounding, press any button to turn off. The alarm will
automatically turn off after 30 seconds.
5. The alarm will sound at the same time everyday at this time unless reset by user.
E. USER SETTINGS
1. Press the mode button until you reach the Step Screen. Press and hold
down the Set button until the screen displays "Weight Unit".
2. Use the + and – buttons to toggle between KG and LB. Press SET to select.
3. Use the + and – buttons to increase/decrease the weight as necessary.
Press SET to select.
4. Next, use the + and –buttons to toggle between cm and inches for your
height. Press SET to select.
All manuals and user guides at all-guides.com
English 8