Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
INSTALLATION
Installing the Terrova and Riptide Terrova Foot Pedal
1
ITEM(S) NEEDED
#2 x 5
a.
Take the Foot Pedal (Item #A) and turn it over.
Put a Foot Pedal Pad (Item #2) in each of the
pad locations.
NOTICE:
Adding the Foot Pedal pads is optional.
The pads are recommended when using the Foot
Pedal on non-carpeted surfaces.
2
b.
Locate the Foot Pedal Cord that exits the mount of
the Terrova, next to the Power Cord.
c.
Unscrew the caps at the end of the Foot Pedal
cords exiting the motor and the Foot Pedal.
d.
Plug the cords together and make sure the
connection is secure. Be sure to tighten the
connector retaining nut.
NOTICE:
The connectors are keyed to prevent
reversed installation.
4 | minnkotamotors.com
#A x 1
Foot Pedal
Bottom
Foot Pedal
Pad Placement
2b
Terrova
Mount
Foot Pedal
Cord from
Terrova
Power
Cord
2d
Foot Pedal
Cord from
Foot Pedal
2c
Cap
Foot Pedal
Cord from
Foot Pedal
Foot Pedal
Foot Pedal
Cord from
Terrova
©2019 Johnson Outdoors Marine Electronics, Inc.
Publicité
