Parts Description; Before The First Use - Tristar RK-6138 Mode D'emploi

Instruction manual
• Only use the appliance with the appropriate
connector.
• The connector must be removed before the
appliance will be cleaned, please make sure
the inlet is completely dry before the unit will
be used again.
• Warning, the escaping steam can be very
hot.
• Be aware of the steam vent during cooking,
as there is danger of burns.

PARTS DESCRIPTION

1. Lid
2. Steam basket
3. Inner bowl
4. Display
5. Digital control panel
6. Measuring cup
7. Spoon
8. On/off switch
9. Condensation collector

BEFORE THE FIRST USE

• Take the appliance and accessories out the box. Remove the
stickers, protective foil or plastic from the device.
• Place the device on a flat stable surface and ensure a minimum
of 10 cm. free space around the device. This device is not
suitable for installation in a cabinet or for outside use.
4
• Put the power cable into the socket. (Note: Make sure the
voltage which is indicated on the device matches the local voltage
before connecting the device. Voltage 220V-240V 50/60Hz)
• Always place the inner pot inside the outer pot before switching
on the rice cooker.
• Make sure that the inner pot contains liquid, or be ready to
immediately ad oil, butter or margarine to the inner pot before
switching on the rice cooker.
• Always dry the outer surface of the inner pot before placing it
inside the cooker. Any moisture remaining on the inner pot
surface may cause a cracking noise while the unit is heating up.
• Press the On/Off switch to the desired position to turn the device
on or off.
• When the device is turned on for the first time, a slight odour will
occur. This is normal, ensure adequate ventilation. This fragrance
is only temporary and will disappear soon.
USE
Timer
• The timer function can be used to set a delayed start time.
• Press the timer button to set the timer function. Press once to
increase by 30 minutes. Long press to increase automatically in
30 minutes interval.
• Timer can be pre-set up to 24 hours.
• Note: Recommended timer pre-setting is no more than 12 hours
to avoid food deterioration.
• After setting the pre-set time press the desired program button
that needs to be started. The screen displays the completion time
and starts the countdown.