bosal 005-138 Instructions De Montage page 4

7. Bring remaining end of cable set through the side hole to the left tail lamp, disconnect the tail light connector. Con-
nect 6-way connector from cable set with tail lamp and join both other connectors together.
Connect white (7-pin), brown and white/black cables (13-pin) to the earth point (possibly mount during installa-
8.
tion of left rear light).
Reinstall both rear lights.
9.
10.
Trailer power supply:
Refer to 13-pin version only. 3-pin connector housing (red/blue, yellow, and brown/green cables) is provided for ex-
panded socket functions. Put this part of cable set behind the trim. To expand socket functions it is necessary to or-
der the following parts:
Function "current supply and earth"
Function "current supply, charge line and earth"
Secure the cable set with supplied cable ties, re-install all trims and other parts which were removed during instal-
lation.
Connect the earth lead to the battery and check all vehicle functions with connected trailer or suitable testing de-
vice.
part no. 014-169
part no. 015-069