Publicité
Turns on the aspirated engine at the last speed of
use.
Turns off the engine (and deactivates the delayed
shutdown function, if it is active).
Reduces the speed used.
Increases the speed used.
Activates the intensive speed, even if the engine is
i
off, for 10 minutes, and then returns to the previously
used speed.
Activates the engine at a suction speed of 100m
24
for 10 minutes
F
Hold for 3s: resets to zero the activated filter alarm
These signals are only visible when the engine is
off.
Activates the 30-minute delayed engine shutdown.
Deactivates the delayed shutdown.
Turns the lighting on or off at the last intensity used.
Reduces or increases the lighting intensity.
ROBLIN - le spécialiste français de l'aspiration -
operation
controls
Indicates the adjustment speed.
HI display and a bottom right point flickers for 1/s.
Display 24 and a bottom right point flickers while the engine
3
/h
is operational;
Once the procedure has ended; the previously displayed
signal is turned off.
FF: indicates the need to wash the metal filters (F1) every
100 hours of operation.
EF: indicates the need to wash the metal filters and the
carbon filter (F2), every 200 hours of operation.
Alternately displays the user speed and the remaining time
until the engine is shut down.
The bottom right point flickers.
display
GB
45
Publicité
