1.- Connect the electrical Airpot to an electricity outlet with
adequate connection voltage, size andconfiguration. If the
plug does not fit into the outlet, please contact an authorised
electrician to determine adequate voltage and size and install
and adequate electricity power supply.
2.- To avoid any injury, switch off the mains switch, unplug the
unit from the power supply and let it cool before carrying out
any maintenance task.
3.- For adequate safe operation, the unit should be located at a
reasonable distance from walls and flammable materials.
4.- Leave free space of at least 31 cm (12") for frontal discharging
for safe and correct performance.
5.- Do not pull on the electricity cable of the unit in order to avoid
injury or damage.
1.- Locate the unit at the proper counter height, in an area that
is convenient for use. The location should be level to
prevent the unit or its contents from accidentally falling, and
strong enough to support the weight of the unit.
2.- Do not place anything on top of the electrical Airpot; doing
so could damage electrical Airpot or subject personnel to
possible injury.
3.- When setting up the unit for operation, make sure power to
the unit is off. Failure to do so could result in personal injury.
4.- To avoid damage to the unit or injury to personnel never use
the electrical Airpot without oil or water, coffee or tea in the
recipient. Never use this appliance without liquids inside, as
this may cause permanent damage.
34
WARNING
!
CAUTIONS
!